GVIRSTOR(8) BSD System Manager's Manual GVIRSTOR(8) NAME gvirstor — control utility for virtual data storage devices SYNOPSIS gvirstor label [-hv] [-s virsize] [-m chunksize] name prov ... gvirstor stop [-fv] name ... gvirstor destroy [-fv] name ... gvirstor add [-vh] name prov ... gvirstor remove [-v] name prov ... gvirstor clear [-v] prov ... gvirstor dump prov ... gvirstor list gvirstor status gvirstor load gvirstor unload DESCRIPTION The gvirstor utility is used for setting up a virtual storage device of arbitrary large size (for example, several TB), consisting of an arbi‐ trary number of physical storage devices with the total size which is equal to or smaller than the virtual size. Data for the virtual devices will be allocated from physical devices on demand. The idea behind gvirstor is similar to the concept of Virtual Memory in operating sys‐ tems, effectively allowing users to overcommit on storage (free file system space). The concept is also known as "thin provisioning" in vir‐ tualization environments, only here it is implemented on the level of physical storage devices. The first argument to gvirstor indicates an action to be performed: label Set up a virtual device from the given components with the speci‐ fied name. Metadata is stored in the last sector of every compo‐ nent. Argument -s virsize is the size of new virtual device, with default being set to 2 TiB (2097152 MiB). Argument -m chunksize is the chunk size, with default being set to 4 MiB (4096 KiB). The default arguments are thus "-s 2097152 -m 4096". stop Turn off an existing virtual device with the given name. This command does not touch on-disk metadata. As with other GEOM classes, stopped geoms cannot be started manually. destroy Same as stop. add Adds new components to existing virtual device with the given name. The specified virstor device must exist and be active (i.e. module loaded, device present in /dev). This action can be safely performed while the virstor device is in use ("hot" operation). remove Removes components from existing virtual device with the given name. Only unallocated providers can be removed. clear Clear metadata on the given providers. dump Dump metadata stored on the given providers. list See geom(8). status See geom(8). load See geom(8). unload See geom(8). Additional options: -f Force the removal of the specified virtual device. -h Hardcode providers' names in metadata. -v Be more verbose. EXAMPLES The following example shows how to create a virtual device of default size (2 TiB), of default chunk (extent) size (4 MiB), with two physical devices for backing storage. gvirstor label -v mydata /dev/ada4 /dev/ada6 newfs /dev/virstor/mydata From now on, the virtual device will be available via the /dev/virstor/mydata device entry. To add a new physical device / compo‐ nent to an active virstor device: gvirstor add mydata ada8 This will add physical storage of ada8 to /dev/virstor/mydata device. To see the device status information (including how much physical storage is still available for the virtual device), use: gvirstor list All standard geom(8) subcommands (e.g. status, help) are also supported. SYSCTL VARIABLES gvirstor has several sysctl(8) tunable variables. int kern.geom.virstor.debug This sysctl controls verbosity of the kernel module, in the range 1 to 15. Messages that are marked with higher verbosity levels than this are suppressed. Default value is 5 and it is not recommended to set this tunable to less than 2, because level 1 messages are error events, and level 2 messages are system warnings. int kern.geom.virstor.chunk_watermark Value in this sysctl sets warning watermark level for physical chunk usage on a single component. The warning is issued when a virstor compo‐ nent has less than this many free chunks (default 100). int kern.geom.virstor.component_watermark Value in this sysctl sets warning watermark level for component usage. The warning is issued when there are less than this many unallocated com‐ ponents (default is 1). All these sysctls are also available as loader(8) tunables. DIAGNOSTICS The gvirstor utility exits 0 on success, and >0 if an error occurs. gvirstor kernel module issues log messages with prefixes in standardized format, which is useful for log message filtering and dispatching. Each message line begins with GEOM_VIRSTOR[%d]: The number (%d) is message verbosity / importance level, in the range 1 to 15. If a message filtering, dispatching or operator alert system is used, it is recommended that messages with levels 1 and 2 be taken seri‐ ously (for example, to catch out-of-space conditions as set by watermark) sysctls. SEE ALSO geom(4), fstab(5), geom(8), glabel(8), newfs(8) HISTORY The gvirstor utility first appeared in FreeBSD 7.0. BUGS Commands add and remove contain unavoidable critical sections which may make the virstor device unusable if a power failure (or other disruptive event) happens during their execution. It is recommended to run them when the system is quiescent. ASSUMPTIONS AND INTERACTION WITH FILE SYSTEMS There are several assumptions that gvirstor has in its operation: that the size of the virtual storage device will not change once it is set, and that the sizes of individual physical storage components will always remain constant during their existence. For alternative ways to imple‐ ment virtual or resizable file systems see zfs(1M), gconcat(8) and growfs(8). Note that gvirstor has nontrivial interaction with file systems which initialize a large number of on-disk structures during newfs. If such file systems attempt to spread their structures across the drive media (like UFS/UFS2 does), their efforts will be effectively foiled by sequen‐ tial allocation of chunks in gvirstor and all their structures will be physically allocated at the start of the first virstor component. This could have a significant impact on file system performance (which can in some rare cases be even positive). AUTHOR Ivan Voras ⟨ivoras@FreeBSD.org⟩ Sponsored by Google Summer of Code 2006. BSD October 1, 2013 BSD